Back to the product list

P40 Oil-Lubricated Piston Compressor

Compact Air Power for Tank Trailer Pressure Discharge

The Paragon P40 oil-lubricated piston compressor is designed for tank truck and liquid bulk tank trailer pressure discharge applications where compact installation, dependable airflow and flexible truck integration matter. Its narrow profile is designed to fit inside truck frame rails, while airflow of up to 34.8 CFM at 25 PSI helps build tank pressure for liquid discharge. 

 

  • Maximum pressure: 40 PSI 
  • Recommended operating speed: 1,350 RPM 
  • Speed range: 500 to 1,500 RPM 
  • Port size: 3/4 in. (19.05 mm) 
  • Approximate dry weight: 76 lbs (34.47 kg), excluding flanges, steel shaft and filter

 

The P40 supports PTO or hydraulic drive configurations, giving fleets, owner-operators and truck upfitters a compact compressor option for liquid bulk transfer systems. 

Compact frame rail fit

The P40's narrow profile is designed to fit inside truck frame rails, helping address limited mounting space on tank truck installations.

30% more air than typical piston compressors

Higher airflow helps the P40 build tank pressure quickly for tank trailer discharge.

Lightweight package

Approximately 76 lbs dry weight, excluding the flanges, steel shaft and filter. 

PTO or hydraulic drive options

Configure the P40 with 1100 or 1300 Series PTO drive flanges or an available L110 hydraulic drive coupling to suit the truck installation. 

Quiet operation

Heavy-duty construction supports quieter compressor operation in tank truck applications.

Available with installation accessories

Includes an air filter, mounting bracket options, oil and a delivery pipework kit with a relief valve, check valve, hot air hose, pressure gauge and Chicago fitting.

Operating pressure (PSI) 

Airflow at 1,350 RPM (CFM) 

Power (HP) 

Potential liquid flow (GPM) 

25 

30.6  

4.6 

105 

30  

30.3  

4.7 

99 

36  

29.8  

4.9 

67 

40 (max) 

29.5  

5.0 

60 

Note: It is recommended that the P40 be operated at 1350 rpm. 

Paragon offers the P40 with components intended to support a complete tank truck setup rather than positioning it as an isolated compressor. 

Available equipment documented for the P40 includes: 

  • Air filter
  • Multiple mounting bracket options
  • 1100 and 1300 Series PTO drive flanges
  • L110 hydraulic drive coupling
  • Relief valve
  • Check valve
  • Hot air hose
  • Pressure gauge
  • Chicago fitting
  • Delivery pipework components

Routine oil and air-filter maintenance helps keep the P40 properly lubricated and serviceable in tank truck operation. Paragon's current P40 maintenance procedure specifies: 

Daily: Check compressor oil level before operation. 

Weekly: Inspect hoses, fittings and mounting hardware. 

Every 6 months: Change compressor oil and the air filter element. 

Every 18 months: Replace the relief valve. 

Reach Out to Us